|
Product Details:
Payment & Shipping Terms:
|
| Nominal Diameter: | DN32-DN3000 | Working Pressure: | 300PSI |
|---|---|---|---|
| Nominal Pressure: | 1.0MPa Or 1.6MPa | Connection: | Flange |
| Material: | Cast Iron, Ductile Iron, Stainless Steel, Carbon Steel | Color: | Blue, Red, Purple Or Customer Requied |
| High Light: | fire fighting gate valve,fire check valve |
||
Introduction:
Of the product from within the gel, nylon cord fabric, the gel outside the compound rubber ball and metal-flange component sets. Pressure is high with gocxJ flexibility and displacement shock-absorbing noise, the installation of flexible, and can be widely used in water drainage, Circxilating water, HVAC, and paper, petrochemicals, shipbuilding, cxxnpressors, pumps, fans and other pipeline systems.
This vavle is suitable on system such as petroleum, chemical industry, foodstuff, medicine, papemaking, water and electricity, shipping, plumbing, the smelting and sources of energy etc the pipe route. Can regard on gas, liquid, semifluid as well as solid powder pipes and power lines and the container of many kinds of corrosiveness and non-corrosiveness adjusts and dams a river the equipment use. Especially extensively being in high layer of building fire protection system reaches other to show in the pipes and power lines system of valve of vavle switch state.
Technical data
| Model | Work pressure MPa(kg.f/cm2) |
Blasting pressure MPa(kg.f/cm2) |
Vacuum kPa(mmHg) |
℃ Apply temperature |
Applicable medium |
| JGD( I ) | 1.6 | 4.8 | 100(750) |
-20—115 (-30+250 > -20 ~+115 (-30 Up to +250 special) |
Air, compressed air, water, water, water, oil, acid and other chemical substances |
| JGD(II) | 1.0 | 3.0 | 86.7(650) | ||
| JGD(III) | 0.6 | 1.8 | 53.3(400) |
Parameter:
Main dimensions
| DN(mm) | L Length L (mm) |
Axial displacement (mm) |
Radial displac- ement (mm) D (mm) |
Actuators (a,.a2) |
Pressure level cxxrespondlng flange bolts from the center hole size | |||
| 伸长 Elongation | Compresaon | 0.6MPa | 1.0MPa | 1.6MPa | ||||
| 32 | 95 | 6 | 9 | 9 | 150 | 90 | 100 | 100 |
| 40 | 95 | 6 | 10 | 9 | 150 | 100 | 110 | 110 |
| 50 | 105 | 7 | 10 | 10 | 150 | 110 | 125 | 125 |
| 65 | 115 | 7 | 13 | 11 | 150 | 130 | 145 | 145 |
| 80 | 135 | 8 | 15 | 12 | 150 | 150 | 160 | 160 |
| 100 | 150 | 10 | 19 | 13 | 150 | 170 | 180 | 180 |
| 125 | 165 | 12 | 19 | 13 | 150 | 200 | 210 | 210 |
| 150 | 180 | 12 | 20 | 14 | 150 | 225 | 240 | 240 |
| 200 | 210 | 16 | 25 | 22 | 150 | 280 | 295 | 295 |
| 250 | 230 | 16 | 25 | 22 | 150 | 335 | 350 | 355 |
| 300 | 245 | 16 | 25 | 22 | 150 | 395 | 400 | 410 |
| 350 | 255 | 16 | 25 | 22 | 150 | 445 | 460 | 470 |
| 400 | 255 | 16 | 25 | 22 | 150 | 495 | 515 | 525 |
| 450 | 255 | 16 | 25 | 22 | 150 | 550 | 565 | 585 |
| 500 | 255 | 16 | 25 | 22 | 150 | 600 | 620 | 650 |
| 600 | 260 | 16 | 25 | 22 | 150 | 705 | 725 | 770 |
| 700 | 320 | 16 | 25 | 22 | 150 | 810 | 840 | 840 |
| 800 | 340 | 16 | 25 | 22 | 150 | 920 | 950 | 950 |
| 900 | 370 | 16 | 26 | 22 | 150 | 1020 | 1050 | 1050 |
| 1000 | 400 | 18 | 26 | 24 | 150 | 1120 | 1160 | 1170 |
| 1200 | 420 | 18 | 28 | 24 | 150 | 1340 | 1380 | 1390 |
| 1400 | 456 | 20 | 28 | 26 | 150 | 1560 | 1590 | |
| 1600 | 500 | 20 | 28 | 26 | 150 | 1760 | 1820 | |
| 1800 | 550 | 20 | 35 | 40 | 150 | 1970 | 2020 | |
| 2000 | 550 | 25 | 35 | 40 | 150 | 2180 | 2230 | |
| 2200 | 550 | 25 | 35 | 30 | 150 | 2390 | ||
| 2400 | 550 | 25 | 35 | 30 | 150 | 2600 | ||
| 2600 | 550 | 25 | 35 | 30 | 150 | 2810 | ||
| 2800 | 550 | 25 | 35 | 30 | 150 | 3020 | ||
| 3000 | 550 | 25 | 35 | 30 | 150 | 3220 | ||
Main Material:
FAQ:
Q1. What is your payment term?
A: T/T 30% down payment, balance to be paid before shipment. or L/C.
Q2: What is your main market?
A: Western Europe, North America, Janpan,,
Q3: Can I get samples from your factory?
A: Yes, sample is free, but the express charge is yours.
Q4: If products have some quality problem, how would you deal with?
A: We will responsible for all the quality problems.
Q5.Are you manufacturer or trading company?
A.We are manufacture(cast iron) and trade company.
Q6. what’s the payment term?
A. We accept T/T, L/C,WESTERN UNION
Q7. What’s the delivery time ?
Pattern needs 30-60 days, sample need 30-50 days.
The first order need 60 days
Q8. What is the standard of package?
A. Export standard package or special package according to customer requirement.
Q9. Do you accept OEM business?
A. Yes, we are OEM supplier.
Q10. what kind of certificate you have ?
A .We have ISO9001, ISO14001,PED,SGS
Contact Person: Sales Manager
