Home ProductsBladder Tank Foam System

PHYM 1000 Liter Mild Steel Foam Tank Fire Fighting Foam Concentrate Tank

China Winan Industrial Limited certification
China Winan Industrial Limited certification
WINAN's products are very good, the materials and craftsmanship of the products are very good, we hope to reach cooperation with WINAN to create a better future

—— Amanda

Our company has been cooperating with WINAN for nearly 3 years, and the overall effect of the products has been very good. I don’t think we will change other factories to produce fire protection products.

—— BILL-purchase

I'm Online Chat Now

PHYM 1000 Liter Mild Steel Foam Tank Fire Fighting Foam Concentrate Tank

PHYM 1000 Liter Mild Steel Foam Tank Fire Fighting Foam Concentrate Tank
PHYM 1000 Liter Mild Steel Foam Tank Fire Fighting Foam Concentrate Tank PHYM 1000 Liter Mild Steel Foam Tank Fire Fighting Foam Concentrate Tank PHYM 1000 Liter Mild Steel Foam Tank Fire Fighting Foam Concentrate Tank

Large Image :  PHYM 1000 Liter Mild Steel Foam Tank Fire Fighting Foam Concentrate Tank

Product Details:
Place of Origin: SHENZHEN, CHINA
Brand Name: WINAN
Certification: CCCF
Model Number: PHYM10
Payment & Shipping Terms:
Minimum Order Quantity: 1 SET
Price: Negotiate
Packaging Details: Pallet
Delivery Time: 7-15 days
Payment Terms: T/T, L/C, Western Union
Detailed Product Description
Capacity: 50-2500 Gallon Service Pressure: 0.6-1.2 MPa
Test Pressure: 1.6 MPa Material: Carbon Steel
Ration Controller: DN80-DN200 Valve Material: 304 SS
High Light:

foam bladder tank

,

fire fighting equipment

WINAN Factory Made 1000 Liter Steel Foam Bladder Tank For Fire Fighting

WINAN Factory Made 1000 Liter Steel Foam Bladder Tank For Fire Fighting

 

 

INTRODUCTION

Fire Fighting foam bladder tank is used for providing foam solution for foam system. It is the source of foam in foam based fire fighting system.

Foam bladder tank consists of pressure tank, rubber bladder, proportioner, control valves, and pipelines. Pressurized water is needed to swap out foam concentrate from bladder in the tank as a certain proportion. Foam concentrate then mix with pressurized water and become foam solution. There is feed inlet to refill or change foam concentrate for the tank.

 

DATA SHEET

Working Pressure Range  6~12 Bar(87~174 PSI)
Pressure Drop  ≤0.2 Bar
Test Pressure Strength   1.6 Bar
Sealing (MPa) 1.6 Bar
Tank Capacity (L) 200~15000 (50~3963 Gallon)
Size of Proportioner (mm) DN80~DN200 (3"~8")
Flow Capacity(L/S) 4~360 (63~1513 GPM)
Mixing Ratio (L/S) 3% OR 6%

 

OPERATION

  1. Fill Foam Concentrate

1. Open bladder vent valve, water drainage valve and tank vent valve, close water inlet valve and foam outlet valve.

2. Fill foam concentrate slowly from foam drainage pipe with a foam pump.

3. Stop the pump now and then to avoid bursting the bladder. Foam concentrate should come from the same manufacturer and the same type.

4. Close foam drainage valve when finished filling foam concentrate. Close water drainage valve, tank vent valve and bladder vent valve. Open water drainage valve 30 minutes later, if there is no foam flow out from water drainage pipe, it indicates the bladder is undamaged.

  1. Operation of The Device
  • Start water pump to supply pressurized water for the tank (biggest working pressure is 1.2MPa)
  • Open water inlet valve and foam outlet valve to supply foam concentrate to proportioner, keep all other valves closed.
  • Close water inlet valve and foam outlet valve to stop supply foam concentrate when finished working.
  • Keep the pump working for a more while to wash pipeline with fresh water.
  • Stop the pump, open tank vent valve and bladder vent valve to relieve pressure. Then close all the valves to set the tank in standby mode.
  • Open water drainage valve to drain away water when the tank need to refill.

PHYM 1000 Liter Mild Steel Foam Tank Fire Fighting Foam Concentrate Tank 0

PHYM 1000 Liter Mild Steel Foam Tank Fire Fighting Foam Concentrate Tank 1

FAQ

1. Do you offer free sample for your clients?

Yes, we offer sample for most of the products

2. What's the MOQ of your products?

Our MOQ is one (1) piece/set.

3. Are you manufacturer with your own factory?

Yes, we are the manufacturer for more than 20 years

4. What's your payment terms?

We accept T/T, L/C, Western Union,etc.

5. How long is the delivery time?

Usually around 12 days after payment.

6. Do you have technical support?

Yes, we have a professional engineering team.

7. Do you have warranty?

Yes, all products have one year warranty.

8. Can you accept OEM?

Yes, we do customized design for our clients.

Contact Details
Winan Industrial Limited

Contact Person: Sales Manager

Send your inquiry directly to us (0 / 3000)